The ECB6200 will need to be installed at the modem/router location to provide the MoCA signal onto the coax network. 2. Which router(s) will this extender work with? This puts moca 2.0 into my coax network. both are about $500, so seems like mesh gets me more for my money. This is my second unit with the same problem. Tks! I now have the cable that used to go directly into my Modem/Router split so one leg goes to my Modem/Router and the other goes to the Extender, still no light. interesting. My #1 goal is to stop paying the $12 per month got the router rental. I have a Technicolor DPC3848VE DOCSIS 3.0 Gateway router with moca enabled from the Gateway and purchased the WCB3000N and they will not put out any wifi signal. Connect the Ethernet cable to the computer and to the Ethernet port on the WCB6200Q4. 13 Kudos Highlighted. I came to this conclusion on my own when trying to dig up more information about the Arris modem and what frequency its MoCA was operating at. One is upstairs in our media loft, one in our living room, one in the master bedroom. The Modem I am using is the Motorola Arris SBG6782-AC. I couldn't tell you how or why it works, but the following is working for me: ONT - coax - splitter - coax - G3100 router; then off the splitter, I have coax going to several different rooms. I received a response from William (at Actiontec Tech Support Email) telling me that currently the ECB6250 cannot be in a mixed network with the WCB6200Q. Are there any settings that I can change on the 6200Q that would help? Thanks for the reply Jadrian. Confused about extenders, mesh, etc for fios, Re: Confused about extenders, mesh, etc for fios, Unable to find your answer here? Privacy | You may need to factory reset your extender and reconfigure it to match your new WiFi settings, but otherwise it should just "work". Put them in same room, Office/Office and connected as you suggested, Success. I have had this unit for a couple years, it has been working great. oh wow. 11:16 AM. 1. THAT was the issue the entire time. If yes, will they continue to work as a SON as it did with the G1100 for roughly the last year? I have no problems with my ECB6250 and it is working fine. Last, if the answer is no could the WCB6200Qs at least be used as non WiFi extenders for devices connected to them by Ethernet? Green lights solid - all good. Unfortunately no they will not work with the G3100 over the coax. Make sure the coaxial cable on both sides are linked. I feel like I should be paying “Cang Family” either tuition for teaching me about this stuff, or for a virtual service visit! Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type. All Verizon routers are compatible with both the WCB6200Q and the WCB3000N Fios Network Extenders; … I'm using MoCA 2.0 Network Adapter ECB6000, one bi-directional splitter 5-1675 Mhz 6kV - Coax ports are 3.5 dB, with a Technicolor DPC3848VE DOCSIS 3.0 modem. This is as much time as I am going to devote to this. Spectrum tells us they can’t do anything … How do I determine what Firmware version I have on the WCB6200Q? This second router automatically took on the name of the primary router but added a suffix to the SSID. 10-20-2020 Can you see Coax Privacy is enabled? I am very happy with the technical support I got from Actiontec and all the devices being mailed back and forth while we troubleshot the issue. I just wish we could have avoided all that by simply noting what MoCA is supported by what devices. Can you go to My Networks -> Network Connections -> Network (Home/Office) -> Coax -> Settings. Cobbling together a network with my coax runs in a new home we purchased. The same goes for ECB5240M. option #2 would be better in the long run, but maybe try renting the new G3100 for a month and see how it works? Unable to find your answer here? A couple of lessons/conclusions: I mean you can buy an E3200 ($200) since it is built for G3100.